specifications subject to change without notice. specifications switch function: spst, 2 thru 12 positions (except position 11) contact rating: switch: 25ma @ 24v dc carry: 100ma @ 50v dc insulation resistance: 100 m min. @ 500v dc contact resistance: initial:50 m typical @ 2-4v dc @ 100ma after life: 100m typical @ 2-4 dc @ 100ma operating life: 2,000 make-and-break cycles, each circuit operating force: 1000 gf max. travel (actuator): 2.0 mm typical dielectric strength: 500v rms min. @ sea level between adjacent terminals temperature range: operating/storage: -40 c to 85 c vibration: to mil-std-202f, method 201 a shock: to mil-std-202f, method 213b, condition a soldering recommendations: wave: 500 f (260 c) for 5s max; hand: 30w soldering iron @ 608 f (320 c) for 2s typical. keep all switches in the ?off? position during soldering and cleaning process. materials housing and actuator: glass filled polyester (pbt) ul94-v0 contacts: phosphor bronze with gold plate over nickel plate terminals: phosphor bronze with gold plate over nickel plate tape: mylar switches are supplied in standard ic tubes with all poles in the ?off? position. packaging series circuit termination no. of positions s = slide type 1 = spst 1 = pc pin 2 = right angle pc pin seal model no. ka how to order 02 03 04 05 06 07 08 09 10 12 (none) = std. unsealed t = top tape sealed example ordering number ka _ s _ 1 _ 1 _ 04 _ r _ t actuator r = recessed act., top side off * e = extended act., top side off ka features & benefits available in 2 to 12 positions tape seal option vertical & right angle options applications/markets garage door openers test & instrumentation telecommunications controller application cap options detector switches rotary switches keylock switches dip switches snap-action switches slide switches rocker switches toggle switches pushbutton switches navigation switches tact switches 216 fax: 763-531-8235 phone: 800-867-2717 series kas switches slide dip switches * not available with right angle termination.
kas 1 pc pin termination options kas 2 right angle pc pin position 1 denotes pin no. 1. p.c. mounting schematic position 1 denotes pin no. 1. p.c. mounting schematic actuator options r recessed e extended seal options r top tape sealed et top tape sealed ?a? 6.44 8.98 11.52 14.06 16.6 19.14 21.68 24.22 26.76 31.84 dimension: (.254) (.354) (.454) (.554) (.654) (.754) (.854) (.954) (1.054) (1.254) ?b? 2.54 5.08 7.62 10.16 12.7 15.24 17.78 20.32 22.86 27.94 dimension: (.100) (.200) (.300) (.400) (.500) (.600) (.700) (.800) (.900) (1.100) positions: 2 3 4 5 6 7 8 9 10 12 cap options detector switches rotary switches keylock switches dip switches snap-action switches slide switches rocker switches toggle switches pushbutton switches navigation switches tact switches 217 info @ e-switch.com www.e-switch.com
|
